Electro - Hydraulic Trainer with Work Station

Product Description

ME 7654 - Electro - Hydraulic Trainer with Work Station    

Technical Specification:

Hydraulic Components

- Pressure relief valve:Pilot-operated (1No.)

Hydraulic Cylinder

- Double actinghydraulic cylinder: With a control cam (1No.)

- Piston diameter: 16 mm

- Piston rod diameter:10 mm

- Stroke length  : 200 mm

Different type of valve

- 3/2 Way directionalcontrol valve:          With hand leveractuation (1No.)

- 4/2 Way directionalcontrol valve:          With hand leveractuation (1No.)

- 4/2 Way directionalcontrol valve:          With singlesolenoid actuation (1No.)

- 4/3 Way directionalcontrol valve:          With doublesolenoid actuation (1No.)

- 4/3 Way directionalcontrol valve:          Closed-centreposition, with have lever actuation (1No.)             

- Non-return valve

- Pilot-operated checkvalve:  Pilot to open (1No.)

- One-way flow controlvalve:  With integrated check valve(1No.)

Suitable weight:  For vertical loading of hydraulic cylinder (1No.)

Mounting kit for weight:For realizing pulling and pushing load (1No.)

T-Connector with selfsealing coupling nipples (2 Nos.) and quick coupling socket (2Nos)

Profile plate anodized: 1100x700 mm, with carriers, mounting aluminumframes and mounting accessories (To be fitted on to the hydraulic workstation)

Hydraulic Powerpack 

External gear pumphaving a delivery rate of 2.5 lpm (approx.) @ 1400rpm operating pressure 60bar, coupled to a single-phase AC motor (230 VAC)having start capacitor andOn/Off switch and overload protection, Pressure relief valve adjustable from0-60 bar Oil reservoir, 25 litres capacity having sight glass, drain screw, airfilter, and P and T ports.          

Hydraulic WorkstationTable

Hydraulic workstationwith 45 square mm aluminum profile legs, wooden work surface, and one pedestaldrawer unit having 5 drawers, each with handles and individual locks, onmetallic full panel drawer slide:

-  Work table size: 1200mm (L) x 900mm (W) x900mm (H), with four castor wheels including two

Lockable wheels at thefront side,

-Drawer size (approx.):                 460mm (L) x 495mm (W) x 158mm (H)each, and overall size of drawer unit (Approx.) 470mm (L) x 495mm (W) x 825mm (H)

- Drawer slide height: 85mmCarrier for mounting components, such as controller modules.

- Carrier: Anodizedaluminum profile plate as a carrier for electronics controller modules

- Electronic ControllerModule:  8051 CPU Memory 64kB Flash Selectionfor Auto / Manual operation through toggle switches

System control manuallythrough Push to ON switches

Reset button for microcontroller                            

Power requirement:      220VAC +10%, 50Hz