DC SHUNT Motor with Control Panel

Product Description

DC Shunt motor 220V, 2.5 KW, 1500 rpm Horizontalfoot mounted internally fan cooled, with 4-point starter, class B insulation.The front and rear end cover should be covered with acrylic sheet withdetachable hook clamp type for showing the internal parts of machine tostudent.

Type : DC Motor, Shunt wound, self excited, screenprotected, horizontal foot mounted, fan cooled.

Capacity: 2.5 KW

Winding: Shunt wound.

R.P.M.: 1500 to be displayed on Panel Board using Proximity Sensor fitted on shaft

Volts.: 230

Insulation: Class ‘B’

Connections: All the terminals of armature and shunt field shall be brought over to abakelite sheet, fixed to C.I. terminal box, fitted on top of Motor.

Mechanical: Loading of the Motor shall be made through Pronney brake arrangement, Loadingconsisting of a C.I. drum pulley, suitable for water cooling, CalibratedDigital Linear Sensor with LCD Display for torque, weight in kg and diameter of

thepulley,canvas belt with hooks, C.P. wheels with threaded studs for tightening thebelt, frame. The pronney brake loading arrangement should be flexibly coupled(through Love-Joy coupling) to shaft of the motor so that motor is easilydetachable from the mechanical loading arrangement as and when required.

Machinesshould be from ISO Certified Company.

ControlBoard :-Rust free powder coated control board made up of high grade Fibre mouldedbody (FRP) of minimum thickness 4 mm for better safety and in compliance withIS3021/IEC60335-1, tested from NABL accredited Lab. Shock proof banana jackterminal (BS- 10), BS10 safety terminals are in compliance withIS302-1/IEC60335-1, tested from NABL accredited Lab. The Enclosure is open fromfront side for fitting of Engraved diagram Bakelite plate. Back side door iswith hinges & lock for open the door from back side suitable for table

mounting.

(i)Digital DC Voltmeter Micro-controller based, NABL Certified, 0-300V – 1 No.

(ii)Digital DC Ammeter Micro-controller based, NABL Certified, 0-10A – 1 No.

(iii)LCD Display for measure the torque, weight in kg and diameter of the pulley – 1No.

(iv)DP MCB suitable for DC operation 220V – 01 No.

(v)3 Point DC Starter 2.5 KW, suitable for above motor – 01 No.

(vi)Insulated banana Jack terminals (BS-10)

(vii)Patch chords.

(viii) Instruction manual.