DC COMPOUND MOTOR with Control Panel

Product Description

DC Compound Motor 220V, 2 HP, 1500 rpm Horizontalfoot mounted internally fan cooled, with 4-point starter, class B insulation.The front and rear end cover should be covered with acrylic sheet withdetachable hook clamp type for showing the internal parts of machine tostudent.

Capacity: 2.5KW

Winding: Compound wound.

R.P.M.: 1500 to be displayed on Panel Board using Proximity Sensor fitted on shaft

Volts.: 230

Insulation: Class ‘B’

Connections: All the terminals of armature, shunt and series field shall be brought overto a bakelite sheet, fixed to C.I. terminal box, fitted on top of Motor.

Mechanical: Loading of the Motor shall be made through Pronney brake arrangement,consisting

Loadingof a C.I. drum pulley, suitable for water cooling, Calibrated Digital Linear Sensor with LCD Display for torque, weight inkg and diameter of the pulley, canvas belt with hooks, C.P. wheels withthreaded studs for tightening the belt, frame. The pronney brake loadingarrangement should be flexibly coupled (through Love-Joy coupling) to shaft ofthe motor so that motor is easily detachable from the mechanical loadingarrangement as and when required

Machines should be fromISO Certified Company.

Control Board :- Rust free powder coated control board made up of high grade Fibre moldedbody (FRP) of minimum thickness 4 mm for better safety and in compliance withIS3021/IEC60335-1, tested from NABL accredited Lab. Shock proof banana jackterminal (BS- 10), BS10 safety terminals are in compliance withIS302-1/IEC60335-1, tested from NABL accredited Lab. The Enclosure is open fromfront side for fitting of Engraved diagram Bakelite plate. Back side door iswith hinges & lock for open the door from back side suitable for tablemounting.

(i)Digital DC Voltmeter Micro-controller based, NABL Certified, 0-300V – 1 No.

(ii)Digital DC Ammeter Micro-controller based, NABL Certified, 0-10A – 1 No.

(iii)LCD Display for measure the torque, weight in kg and diameter of the pulley – 1No.

(iv)DP MCB suitable for DC operation 220V – 01 No.

(v)4 Point DC Starter 2.5 KW, suitable for above motor – 01 No.

(vi)Insulated banana Jack terminals (BS-10)

(vii)Patch chords.

(viii)Instruction manual.

Supplied with data acquisitioninstrument with software. Monitoring motor current, voltage, power, Torque inNM /KGCM, Speed in RPM, Make real time graph on PC, data monitoring and recordingon PC, Motor on/off using panel and PC software,