D.C. Shunt Generator, 2.5 Kw, 220V With Control Pa

Product Description

We are a renowned supplier of a wide array of D.C. Shunt Generator, 2.5 Kw, 220V With Control Pa to our highly honored clients. It is precisely designed using fine quality raw material and ultra modern machinery at our vendors unit under the professional guidance and supervision. We conduct various quality tests to make sure that no compromise is done with its quality and D.C. Shunt Generator, 2.5 Kw, 220V With Control Pa stands in sync with the industrial laid standards.

TECHNICAL SPECIFICATION :

GENERATOR

D.C. Shunt Generator 2.5 kw, 230 volts, 1500 R.P.M., 4 Pole with interpoleself excited, continuous rating, Insulation Class "B", Horizontal foot mounted, All the terminals are broughtout to the terminal box.

Control Desk :

The Control desk consist of an Instrument panel and working area.

The control desk made of 30mm x 30mm x 1.6mm tubular mild steel and MS sheet of 1 mm thickness, Siemens Grey colour powder coated with wooden top on the working area.

The overall dimensions W = 900 mm ; D = 625 mm ; H = 1500 mm.

The Box type Instrument Panel above the working area and of size W = 900 mm ; D = 250 mm ; H = 750 mm & Front side of 6mm thick bakelite sheet of brown colour and fitted at inside of the tube structure.

All other sides made of MS sheet, Two sides of the panel are to be perforated for air ventilation.

Back side in the form of hinged door with suitable locking arrangement.

The working area top fitted in front of the Instrument Panel at a height of 750 mm from bottom.

The top of W = 900 mm x D = 375mm and made of 19mm marine plywood fitted with 3 mm Ivory colour edhylam sheet on top.

The three sides of the working top lipped using 22mm x 6mm teakwood lipping patti.

30 A. Educational type backelite insulated banana terminals provided for supply and generator connection.

Circuit diagram of panel provided inside the panel. All accessories connected with internal wiring ferrules etc.

The Instrument Panel consist of following accessories :

PAINT :

Generator will be painted with two coats of smoke gray oil paint and pannel board will be powder coated.

BASE PLATE :

Generator mounted on fabricated base plate of M.S.'C' channel size 75 x 40 x 6 mm thick. Base plate length 800 mm for Prime mover coupling.