Owing to our rich industrial experience, we have been a trusted supplier of D.C. Compound Generator 2.5 KW to our widely spread clients. It is precisely engineered for use in science industry to cater to the varied requirements of our patrons. This generator is fabricated using superior quality material and equipment at our unit as per the prevailing industrial norms and standards. D.C. Compound Generator 2.5 KW goes through various inspections to ensure no compromise is done with its quality. A laboratory type model for conducting various experiments.
TECHNICAL SPECIFICATION :
D. C. Compound Generator 2.5 kw, 230 volts, 1500 R.P.M., 4 Pole, self excited, continuous rating, Insulation Class "B", Horizontal foot mounted, All the terminals are brought out to the terminal box.
Control Desk :
- The Control desk consist of an Instrument panel and working area.
- The control desk made of 30mm x 30mm x 1.6mm tubular mild steel and MS sheet of 1 mm thickness, Siemens Grey colour powder coated with wooden top on the working area.
- The overall dimensions W = 900 mm ; D = 625 mm ; H = 1500 mm.
- The Box type Instrument Panel above the working area and of size W=900 mm ; D=250 mm ; H=750 mm & Front side of 6mm thick bakelite sheet of brown colour and fitted at inside of the tube structure.
- All other sides made of MS sheet, Two sides of the panel are to be perforated for air ventilation.
- Back side in the form of hinged door with suitable locking arrangement.
- The working area top fitted in front of the Instrument Panel at a height of 750 mm from bottom.
- The top of W = 900 mm x D = 375mm and made of 19mm marine plywood fitted with 3 mm Ivory colour edhylam sheet on top.
- The three sides of the working top lipped using 22mm x 6mm teakwood lipping patti.
- 30 A. Educational type backelite insulated banana terminals provided for supply and generator connection.
- Circuit diagram of panel provided inside the panel.
- All accessories connected with internal wiring ferrules etc
The Instrument Panel consist of following accessories :
- Voltmeter M.C. type 0-300 volts, 96 x 96 mm Mars Make : 1 no.
- Ammeter M.C. type 0-15 Amp., 96 x 96 mm Mars Make : 1 no.
- Ammeter M.C. type 0-1.5 Amp., 96 x 96 mm Mars Make : 1 no.
- Field regulator disc type suitable to decrease field current upto min. Amp : 1 no.
- DPST Knife Switch - 20 Amps., it be mounted on the Panel Board : 1 no.
- Indicating lamp LED type Red, colour 12mm size : 1 no.
- Fuses H.R.C. Backelite type base with top 16A 230 V. : 2 nos.
PAINT : Generator and panel board painted with two coats of smoke gray oil paint
BASE PLATE : Generator mounted on fabricated base plate of M.S.'C' channel size 75 x 40 x 6 mm thick.
Base plate lenghth 800 mm for Primemover coupling.